Search found 714 matches

by Peter Cresswell
Sun Apr 11, 2021 12:29 pm
Forum: MGB Technical
Topic: Water pump size
Replies: 8
Views: 703

Re: Water pump size

You can adjust the distance in question by using a puller to increase it or a press to decrease it. I had to do this with the new pump I got, to make the 3 pulleys line up for the fan belt. You have a few mm each way to play with, but not cm! I too have searched against the part number you quoted an...
by Peter Cresswell
Sun Apr 11, 2021 11:42 am
Forum: MGB Technical
Topic: Dragging disc brakes
Replies: 3
Views: 22

Re: Dragging disc brakes

Ian - I fitted new ones from MGBHive to my roadster. One word of caution though with new ones - the rubber dust seal seems to be too strong and they retract the piston back into the caliper, resulting in no brakes when you first push on the pedal! The do improve with miles (about 2000+) and you do g...
by Peter Cresswell
Sun Apr 11, 2021 11:35 am
Forum: MGB Technical
Topic: Bonnet options ?
Replies: 4
Views: 30

Re: Bonnet options ?

You really need access to an English Wheel to get the double curvature right, and the raised part in the centre that lines up with the MG badge on the grille will still be a problem. Now the show season looks like it will go ahead this year, find a bonnet that is in good condition and use that. Alum...
by Peter Cresswell
Sun Apr 11, 2021 11:27 am
Forum: MGB General
Topic: Factory record copy Personal Export Delivery
Replies: 5
Views: 564

Re: Factory record copy Personal Export Delivery

Remyd wrote: Sun Jan 31, 2021 11:37 am I don't think mine left england, it was first registered in Birmingham. I might write to the DVLA to see if I can find out who the previous owners where.
Remy - Since the introduction of GPRS, the DVLA won't provide the information about previous owners.
by Peter Cresswell
Thu Apr 01, 2021 10:13 pm
Forum: MGB Technical
Topic: Inexistent horn bullet terminal
Replies: 24
Views: 872

Re: Inexistent horn bullet terminal

Peter, see Clausager - top of page 146 - "1971 model year Changes to all cars. horn push returned to steering wheel centre" Ian F Hi Ian, Thanks for pointing that out. I assumed that the Sept 1969 (1970 model year) was the point of the change and I didn't read any further on. Cheers Pete
by Peter Cresswell
Wed Mar 31, 2021 12:23 pm
Forum: MGB Technical
Topic: Inexistent horn bullet terminal
Replies: 24
Views: 872

Re: Inexistent horn bullet terminal

...and my 1969 Roadster has the earlier steering column and the horn button on the stalk! This might show that the stalk can be easily swapped for a later one.
I have looked up the parts in the Moss catalogue and they give the change point for the stalk as Clausager
by Peter Cresswell
Wed Mar 31, 2021 10:20 am
Forum: MGB Technical
Topic: Inexistent horn bullet terminal
Replies: 24
Views: 872

Re: Inexistent horn bullet terminal

Hi Remy, I thought by 1970 the horn was operated by pushing the end of the indicator stalk. This seems to be confirmed by Clausager that from September 1969 a new column stalk was introduced that operated the indicators, headlight main beam and flash and the horn. The change was from car number 1871...
by Peter Cresswell
Tue Mar 16, 2021 2:35 pm
Forum: MGB Technical
Topic: Changing brake discs
Replies: 6
Views: 592

Re: Changing brake discs

As you need to remove the hub to remove the disc you will need to reset the end float when the hub is refitted. If it is just to clean the discs up you might be able to do what is necessary without removing them completely.
by Peter Cresswell
Tue Mar 16, 2021 2:22 pm
Forum: MGB Technical
Topic: Gearbox Oil Additive
Replies: 4
Views: 463

Re: Gearbox Oil Additive

Generally I would say don't put any friction reducing additive in a gearbox, whether it has overdrive or not, The synchro cones rely on an amount of friction to work and in an overdrive there is a cone clutch with a friction material lining so need friction to work. In the early 1990s I used a Toyot...
by Peter Cresswell
Sat Mar 13, 2021 6:28 pm
Forum: MGB General
Topic: Hello and any advice welcome
Replies: 20
Views: 1238

Re: Hello and any advice welcome

Hi Bri, Welcome to MGB Ownership and I hope you will use this forum as often as you need. There is a wealth of knowledge behind this unassuming facade! I note your engine was totally reconditioned in 1995 so I would suggest (unless you have evidence to show it's been done) you put getting the cylind...