Page 1 of 1
Chrome Plating
Posted: Sat Nov 28, 2015 11:04 am
by john maddocks
Has anybody of late had any Chrome plating done on MGB bumpers. Looking to have mine done. Any recommendations for platers. Thanks for any help.
Re: Chrome Plating
Posted: Sat Nov 28, 2015 6:09 pm
by George Wilder
John
It would help if you stated where you are based - for this and all other enquires - can be added to your details. B bumpers are quite large to move around as you will realise so a local plater could make things easier.
Re: Chrome Plating
Posted: Sat Nov 28, 2015 7:08 pm
by john maddocks
Thanks for your reply. I live near Kings Lynn. So East Midlands Area would be Fine
Re: Chrome Plating
Posted: Sun Nov 29, 2015 8:58 am
by George Wilder
John
I intend getting my rear bumper rechromed this winter though a MGCC member who operates a metal polishing firm in Thetford.
Is this too far?
Re: Chrome Plating
Posted: Tue Dec 01, 2015 12:32 pm
by john maddocks
George,
Thanks for your reply. Thetford would be fine. Regards John
Re: Chrome Plating
Posted: Wed Dec 02, 2015 9:46 am
by George Wilder
John
I will see what can be arranged - will hopefully see my contact at the natter a week on Friday. If not I'll phone him
Re: Chrome Plating
Posted: Thu Jan 21, 2016 3:43 pm
by George Wilder
John (and anybody else who requires chrome plating)
Chrome Plating in Thetford
The contact is Tony Burgess
Director
Wyatt Polishing Ltd
Tel 01842 766770
Email
[email protected]
Tony is an MGCC member has a fast road going Midget and a very nice Rover P5 both of which he built/restored. His company does lost of work on older cars/bikes etc.
Re: Chrome Plating
Posted: Sun Feb 07, 2016 11:45 am
by john maddocks
George Thanks for your help