Page 1 of 1

SU CARBS

Posted: Tue Jun 07, 2016 2:00 pm
by Timmy Wainwright
Hi all.....now then I need my SU Carbs rebuilt as my 78b is running a tad ruff and won't pass an emissions test at an MOT. I am currently toying with the idea of doing it myself......Is it simple enough or do people recommend I pay to get it done??

Re: SU CARBS

Posted: Tue Jun 07, 2016 9:13 pm
by Peter Cresswell
Hi Timmy
It is pretty straightforward, and you can buy an overhaul kit from Burlen (See http://sucarb.co.uk/carbspec/carburetto ... s/id/1616/ ) for the MGB. Your car should have the HIF carbs rather than the HS4 so make sure you get the right rebuild kits. You will need two of these kits, as the carburettors are handed (front and rear) and the kit might have different parts. Burlen are very helpful should you need advice on the phone.
Only take one carb to pieces at a time, so you have the other one as a reference. An aerosol of carb or brake cleaner will get all the oily muck off before you start. An old toothbrush will help remove the stubborn stuff.
The Haynes or BMC/BL workshop manuals will help especially setting up and adjusting the carbs after you have refurbished them. The Haynes MGB Restoration Manual is also very useful as it tells you how to take them apart and look, test for wear and put them back together.

Re: SU CARBS

Posted: Wed Jun 08, 2016 6:25 pm
by David M B Leggeat
Timmy,
The technical section of the Burlen website also gives instructions on how to dismantle and re assemble SU carbs..
Regards,
David.